Controller design for gating traffic control in presence of time-delay in urban road networks

Recent studies demonstrated the efficiency of feedback-based gating control in mitigating congestion in urban networks by exploiting the notion of macroscopic or network fundamental diagram (MFD or NFD). The employed feedback regulator of proportional-integral (PI)-type targets an operating NFD point of maximum throughput to enhance the mobility in the urban road network during the peak period, under saturated traffic conditions. In previous studies, gating was applied directly at the border of the protected network (PN), i.e. the network part to be protected from over-saturation. In this work, the recently developed feedback-based gating concept is applied at junctions located further upstream of the PN. This induces a time-delay, which corresponds to the travel time needed for gated vehicles to approach the PN. The resulting extended feedback control problem can be also tackled by use of a PI-type regulator, albeit with different gain values compared to the case without time-delay. Detailed procedures regarding the appropriate design of related feedback regulators are provided. In addition, the developed feedback concept is shown to work properly with very long time-steps as well. A large part of the Chania, Greece, urban network, modelled in a microscopic simulation environment under realistic traffic conditions, is used as test-bed in this study. The reported results demonstrate a stable and efficient behaviour and improved mobility of the overall network in terms of mean speed and travel time.     

液化天然气(LNG)汽车日常检查方法及维护技术综述

天然气是一种优质的替代燃料,具有污染小、安全系数高、运行费用低等优点。天然气已经成为城市公共交通领域应用最为成功和广泛的车辆替代燃料技术,为推动交通运输行业的节能减排做出了显著的贡献。液化天然气汽车,作为天然气汽车的一种类型,与传统汽柴油车相比,液化天然气汽车安装了包括液化天然气气瓶、气管路及各种控制阀门和仪表在内的专用装置,在对液化天然气汽车进行日常检查时需要针对液化天然气汽车的专用装置进行重点检查。本文则针对液化天然气汽车的特点,对液化天然气汽车的正确使用方法、日常检查方法及维护技术要求、以及相关注意事项三个方面进行了解读,为指导液化天然气汽车进行日常检查与定期维护提供了技术参考。     

Towards data-driven car-following models

Car following models have been studied with many diverse approaches for decades. Nowadays, technological advances have significantly improved our traffic data collection capabilities. Conventional car following models rely on mathematical formulas and are derived from traffic flow theory; a property that often makes them more restrictive. On the other hand, data-driven approaches are more flexible and allow the incorporation of additional information to the model; however, they may not provide as much insight into traffic flow theory as the traditional models. In this research, an innovative methodological framework based on a data-driven approach is proposed for the estimation of car-following models, suitable for incorporation into microscopic traffic simulation models. An existing technique, i.e. locally weighted regression (loess), is defined through an optimization problem and is employed in a novel way. The proposed methodology is demonstrated using data collected from a sequence of instrumented vehicles in Naples, Italy. Gipps’ model, one of the most extensively used car-following models, is calibrated against the same data and used as a reference benchmark. Optimization issues are raised in both cases. The obtained results suggest that data-driven car-following models could be a promising research direction.     

基于AIGA-WLSSVM的埋地管道腐蚀速率预测方法

为了降低埋地管道腐蚀影响因素之间的复杂相关性,提高腐蚀预测精度,文中提出一种基于自适应免疫遗传算法-加权最小二乘支持向量机(AIGA-WLSSVM)的埋地管道腐蚀速率预测建模方法,并采用AIGA优化模型参数,进一步提高模型的学习能力和稳定性。最后通过实例分析验证了AIGA-WLSSVM建模方法在埋地管道腐蚀速率预测中的可行性和有效性,为埋地管道的检修与更换提供参考。     

Vehicle kilometers traveled reduction impacts of Transit-Oriented Development: Evidence from Shanghai City

The role of residential self-selection has become a major subject in the debate over the relationships between the built environment and travel behavior. Numerous previous empirical studies on this subject have provided valuable insights into the associations between the built environment and travel behavior. However, the vast majority of the studies were conducted in North American and European cities; yet this research is still in its infancy in most developing countries, including China, where residential and transport choices are likely to be more constrained and travel-related attitudes quite different from those in the developed world. Using the data collected from 2038 residents currently living in TOD neighborhoods and non-TOD neighborhoods in Shanghai City, this paper aims to partly fill the gaps by investigating the causal relationship between the built environment and travel behavior in the Chinese context. More specifically, this paper employs Heckman’s sample selection model to examine the reduction impacts of TOD on personal vehicle kilometers traveled (VKT), controlling for self-selection. The results show that whilst the effects of residential self-selection are apparent; the built environment exhibits the most significant impacts on travel behavior, playing the dominant role. These findings produce a sound basis for local policymakers to better understand the nature and magnitude toward the impacts of the built environment on travel behavior. Providing the government department with reassurance that effective interventions and policies on land use aimed toward altering the built environment would actually lead to meaningful changes in travel behavior.     

基于多层次模型的波函数法在凹域问题应用研究

波函数法（Wave Based Method，WBM）是近年来发展的基于间接 Trefftz 理论的结构—声辐射中频问题的一种重要方法。 WBM 函数收敛的充要条件是分析域为凸域。为提高使用 WBM 理论的应用范围和应用效率，根据多层次模型，提出了补域概念用于解决凹域问题。最后，以一个周边简支矩形薄板为例进行验证数值，计算结果表明了方法准确性和有效性。     

某平台机舱进排风口气流组织的CFD模拟

某自升式平台的机舱进、排风口位置比较接近,机舱排出的热气受大气风影响可能返回进风口,进而提高进风温度,成为一个设计隐患。文章应用CFD技术,通过模拟一定的大气环境条件下进排风口处的气流组织,找出最不利工况,并提出切实可行的改进建议。     

一种简易核磁共振实验教学仪器

自制了一种连续波核磁共振教学实验仪器,包括设计了简单的背景磁场,以及自制实验仪器探头。用示波器观测信号,经过简单的水样品的实验,结果证明,仪器能够得到高质量的连续波核磁共振信号。     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

An improved cellular automaton with axis information for microscopic traffic simulation

Cellular Automaton (CA), an efficient dynamic modeling method that is widely used in traffic engineering, is newly introduced for traffic load modeling. This modeling method significantly addresses the modest traffic loads for long-span bridges. It does, however, require improvement to calculate precise load effects. This paper proposed an improved cellular automaton with axis information, defined as the Multi-axle Single-cell Cellular Automaton (MSCA), for the precise micro-simulation of random traffic loads on bridges. Four main ingredients of lattice, cells’ states, neighborhoods and transition rules are redefined in MSCA to generate microscopic vehicle sequences with detailed vehicle axle positions, user-defined cell sizes and time steps. The simulation methodology of MSCA is then proposed. Finally, MSCA is carefully calibrated and validated using site-specific WIM data. The results indicate: (1) the relative errors (REs) for the traffic parameters, such as volumes, speeds, weights, and headways, from MSCA are basically no more than ±10% of those of WIM data; (2) the load effects of three typical influence lines (ILs) with varied lengths of 50, 200 and 1000 m are also confidently comparable, both of which validate the rationality and precision of MSCA. Furthermore, the accurate vehicle parameters and gaps generated from MSCA can be applied not only for precise traffic loading on infrastructures but also for the accurate estimation of vehicle dynamics and safety. Hence, wide application of MSCA can potentially be expected.